Many graduates will also take physics in 2017, as this exam is in high demand. Many universities need you to have a USE result in physics so that in 2017 they can accept, and you can enter certain specialties of the faculties of their institutes. And because of this, the future graduate, who is studying in the 11th grade, not knowing that he will have to difficult exam to pass, and not just like that, but with such results that will really allow you to enter a good specialty, which requires knowledge of physics as a subject and the presence USE results, as an indicator that this year you have the right to apply for admission to study, guided by the fact that you passed the Unified State Examination in Physics in 2017, you have good scores, and you think that you will enter at least the commercial department, although I would like to go to the budget one.

And that's why we think that in addition to school textbooks, knowledge available in the brain of the head, as well as those books that you have already bought, you will need at least two more files that we recommend you download for free.

Firstly, these are the years, because this is the base on which you will rely in the first place. There will also be specifications and codifiers, according to which you will learn the topics that need to be repeated and, in general, the entire exam procedure and the conditions for its conduct.

Secondly, these are the KIMs of a trial exam in physics held by FIPI in early spring, that is, in March-April.

Here we offer you to download them here, and not only because it's all free, but to a greater extent for the reason that it is you who need it, and not us. These USE assignments in physics taken from open bank data, in which FIPI places tens of thousands of tasks and questions in all subjects. And you understand that it’s simply unrealistic to solve them all, because it takes 10 or 20 years, and you don’t have such time, you need to act urgently in 2017, because you don’t want to lose one year at all, and besides new graduates will arrive there, whose level of knowledge is unknown to us, and therefore it is not clear how it will be easy or difficult to compete with them.

Given that knowledge fades over time, you also need to learn now, that is, while there is fresh knowledge in your head.

Based on these facts, we come to the conclusion that it is necessary to make every effort to prepare yourself in an original way for any exam, including the USE exam in physics in 2017, the trial early tasks of which we offer you right now and download here.

That's all and you need to understand thoroughly and to the end, because it will be difficult to digest everything the first time, and what you see in the tasks you downloaded will give you food for thought in order to be ready for all the troubles that await you on exam in the spring!

Physics exam duration - 3 hours 55 minutes
The work consists of two parts, including 31 tasks.
Part 1: tasks 1 - 23
Part 2: tasks 24 - 31.
In tasks 1-4, 8-10, 14, 15, 20, 24-26 the answer is
integer or final decimal.
The answer to tasks 5-7, 11, 12, 16-18, 21 and 23
is a sequence of two digits.
The answer to task 13 is a word.
The answer to tasks 19 and 22 are two numbers.
The answer to tasks 27-31 includes
detailed description throughout the course of the task.
Minimum test score (on a 100-point scale) - 36

Demo version of the Unified State Examination 2020 in Physics (PDF):

Unified State Exam

The purpose of the demonstration var-ta of the exam tasks is to enable anyone USE participant get an idea of ​​the structure of KIM, the number and form of tasks, the level of their complexity.
The given criteria for evaluating the performance of tasks with a detailed answer, included in this option, give an idea of ​​the requirements for the completeness and correctness of writing a detailed answer.
For successful preparation for passing the exam, I propose to analyze the solutions of prototypes real tasks from variant ege.

When preparing for the exam, graduates are better off using options from official sources information support final exam.

To understand how to do the examination work, you should first of all familiarize yourself with the demo versions of the KIM USE in physics of the current year and with the USE options early period.

05/10/2015 in order to provide graduates additional opportunity prepare for the unified state exam in physics on the FIPI website is published on one version of the CMM used for conducting the exam ahead of schedule in 2017. This real options from the exam held on 04/07/2017.

Early versions of the exam in physics 2017

Demonstration version of the exam 2017 in physics

Task option + answers	option+answer
Specification	download
Codifier	download

Demo versions of the exam in physics 2016-2015

Physics	Download option
2016	version of the exam 2016
2015	variant EGE fizika

Changes in KIM USE in 2017 compared to 2016

The structure of part 1 of the examination paper has been changed, part 2 has been left unchanged. From the examination work, tasks with the choice of one correct answer were excluded and tasks with a short answer were added.

When making changes to the structure of the examination work, the general conceptual approaches to the assessment of educational achievements were preserved. including remained unchanged maximum score for the completion of all tasks of the examination paper, the distribution of maximum scores for tasks of different levels of complexity and the approximate distribution of the number of tasks by sections school course physics and methods of activity.

A complete list of questions that can be controlled at the unified state exam in 2017 is given in the codifier of content elements and requirements for the level of graduates educational organizations for the unified state exam in 2017 in physics.

The purpose of the demonstration version of the exam in physics is to enable any participant in the exam and the general public to get an idea of ​​the structure of future KIM, the number and form of tasks, and their level of complexity.

The given criteria for evaluating the performance of tasks with a detailed answer, included in this option, give an idea of ​​the requirements for the completeness and correctness of writing a detailed answer. This information will allow graduates to develop a strategy for preparing and passing the exam.

Approaches to the selection of content, the development of the structure of the KIM USE in physics

Each version of the examination paper includes tasks that test the development of controlled content elements from all sections of the school physics course, while tasks of all taxonomic levels are offered for each section. The most important in terms of continuing education in higher educational institutions content elements are controlled in the same variant by tasks of different levels of complexity.

The number of tasks for a particular section is determined by its content content and in proportion to the study time allotted for its study in accordance with an exemplary program in physics. Various plans according to which are constructed exam options, are built on the principle of content addition so that, in general, all series of variants provide diagnostics for the development of all content elements included in the codifier.

Each option includes tasks in all sections of different levels of complexity, allowing you to test the ability to apply physical laws and formulas both in typical educational situations and in non-traditional situations that require the manifestation of sufficient high degree independence when combining known action algorithms or creating your own task execution plan.

The objectivity of checking tasks with a detailed answer is ensured by uniform evaluation criteria, the participation of two independent experts evaluating one work, the possibility of appointing a third expert and the presence of an appeal procedure. Single State exam in physics is a graduate elective exam and is designed to differentiate when entering higher education institutions.

For these purposes, tasks of three levels of complexity are included in the work. Completing tasks basic level complexity allows you to assess the level of development of the most significant content elements of the course of physics high school and mastery of the most important activities.

Among the tasks of the basic level, tasks are distinguished, the content of which corresponds to the standard of the basic level. Minimal amount USE scores in physics, which confirms that the graduate has mastered the program of secondary (complete) general education in physics, is established based on the requirements for mastering the basic level standard. Use in examination work tasks of increased and high levels of complexity allows us to assess the degree of readiness of the student to continue education at the university.

Option No. 3109295

Early Unified State Examination in Physics 2017, version 101

When completing tasks with a short answer, enter in the answer field the number that corresponds to the number of the correct answer, or a number, a word, a sequence of letters (words) or numbers. The answer should be written without spaces or any additional characters. Separate the fractional part from the whole decimal point. Units of measurement are not required. In tasks 1-4, 8-10, 14, 15, 20, 25-27, the answer is an integer or a final decimal fraction. The answer to tasks 5–7, 11, 12, 16–18, 21 and 23 is a sequence of two numbers. The answer to task 13 is a word. The answer to tasks 19 and 22 are two numbers.

If the option is set by the teacher, you can enter or upload answers to the tasks with a detailed answer into the system. The teacher will see the results of the short answer assignments and will be able to grade the uploaded answers to the long answer assignments. The points given by the teacher will be displayed in your statistics.

Version for printing and copying in MS Word

The figure shows a graph of the dependence of the projection of the body velocity v x from time.

Determine the projection of the acceleration of this body a x in the time interval from 15 to 20 s. Express your answer in m / s 2.

Answer:

Cube mass M= 1 kg, laterally compressed by springs (see figure), resting on a smooth horizontal table. The first spring is compressed by 4 cm, and the second is compressed by 3 cm. The stiffness of the first spring k 1 = 600 N/m. What is the stiffness of the second spring k 2? Express your answer in N/m.

Answer:

Two bodies are moving at the same speed. The kinetic energy of the first body is 4 times less than the kinetic energy of the second body. Determine the ratio of the masses of the bodies.

Answer:

At a distance of 510 m from the observer, workers drive piles using a pile driver. How long will it take from the moment when the observer sees the impact of a copra until the moment when he hears the sound of the impact? The speed of sound in air is 340 m/s. Express your answer in

Answer:

The figure shows graphs of the dependence of pressure p from the depth of immersion h for two liquids at rest: water and the heavy liquid diiodomethane, at a constant temperature.

Choose two true statements that are consistent with the given graphs.

1) If inside a hollow ball the pressure is equal to atmospheric, then in water at a depth of 10 m the pressure on its surface from the outside and from the inside will be equal to each other.

2) The density of kerosene is 0.82 g/cm 3 , a similar graph of pressure versus depth for kerosene will be between the graphs for water and diiodomethane.

3) In water at a depth of 25 m, pressure p 2.5 times more than atmospheric.

4) With increasing depth of immersion, the pressure in diiodomethane increases faster than in water.

5) The density of olive oil is 0.92 g/cm 3 , a similar graph of pressure versus depth for oil will be between the graph for water and the abscissa (horizontal axis).

Answer:

A massive load suspended from the ceiling on a weightless spring makes vertical free vibrations. The spring remains stretched all the time. How do the potential energy of the spring and the potential energy of the load behave in the gravitational field when the load moves upward from the equilibrium position?

1) increases;

2) decreases;

3) does not change.

Answer:

A truck moving along a straight horizontal road at a speed of v braked so that the wheels stopped turning. Truck weight m, coefficient of friction of the wheels on the road μ . Formulas A and B allow you to calculate the values ​​of physical quantities characterizing the movement of the truck.

Establish a correspondence between formulas and physical quantities, the value of which can be calculated using these formulas.

BUT	B

Answer:

As a result of cooling rarefied argon, its absolute temperature decreased by 4 times. How many times did the average kinetic energy of the thermal motion of argon molecules decrease in this case?

Answer:

The working body of a heat engine receives an amount of heat from the heater equal to 100 J per cycle, and performs work of 60 J. What is the efficiency of a heat engine? Express your answer in %.

Answer:

The relative humidity of the air in a closed vessel with a piston is 50%. What will be the relative humidity of the air in the vessel if the volume of the vessel at a constant temperature is doubled? Express your answer in %.

Answer:

The hot substance, which was originally in a liquid state, was slowly cooled. The heat sink power is constant. The table shows the results of measurements of the temperature of a substance over time.

Choose from the proposed list two statements that correspond to the results of the measurements, and indicate their numbers.

1) The process of crystallization of the substance took more than 25 minutes.

2) The specific heat capacity of a substance in liquid and solid state is the same.

3) The melting point of the substance under these conditions is 232 °C.

4) After 30 min. after the beginning of the measurements, the substance was only in the solid state.

5) After 20 min. after the beginning of the measurements, the substance was only in the solid state.

Answer:

Graphs A and B show diagrams p−T And p−V for processes 1–2 and 3–4 (hyperbola) carried out with 1 mole of helium. On the charts p- pressure, V- volume and T is the absolute temperature of the gas. Establish a correspondence between the graphs and statements that characterize the processes depicted on the graphs. For each position of the first column, select the corresponding position of the second column and write down the selected numbers in the table under the corresponding letters.

BUT	B

Answer:

How is the Ampère force directed relative to the figure (to the right, left, up, down, towards the observer, away from the observer), acting on conductor 1 from the side of conductor 2 (see figure), if the conductors are thin, long, straight, parallel to each other? ( I- current strength.) Write down the answer in a word (s).

Answer:

A direct current flows through a section of the circuit (see figure) I\u003d 4 A. What current strength will the ideal ammeter included in this circuit show if the resistance of each resistor r= 1 ohm? Express your answer in amperes.

Answer:

In the experience of observation electromagnetic induction a square frame of one turn of thin wire is in a uniform magnetic field perpendicular to the plane of the frame. Induction magnetic field increases uniformly from 0 to the maximum value IN max per time T. At the same time, the frame is excited EMF induction, equal to 6 mV. What EMF of induction will appear in the frame if T decrease by 3 times IN max decrease by 2 times? Express your answer in mV.

Answer:

A uniform electrostatic field is created by a uniformly charged extended horizontal plate. The field strength lines are directed vertically upwards (see figure).

From the list below, select two correct statements and indicate their numbers.

1) If to the point BUT place a test point negative charge, then a force directed vertically downwards will act on it from the side of the plate.

2) The plate has a negative charge.

3) The potential of the electrostatic field at a point IN lower than point FROM.

5) The work of the electrostatic field on the movement of a test point negative charge from a point BUT and to the point IN equals zero.

Answer:

An electron moves in a circle in a uniform magnetic field. How will the Lorentz force acting on the electron and the period of its revolution change if its kinetic energy is increased?

For each value, determine the appropriate nature of the change:

1) increase;

2) decrease;

3) will not change.

Write in the table the selected numbers for each physical quantity. Numbers in the answer may be repeated.

Answer:

The figure shows a DC circuit. Establish a correspondence between physical quantities and formulas by which they can be calculated ( ε – EMF of the current source, r – internal resistance current source, R is the resistance of the resistor).

For each position of the first column, select the corresponding position of the second column and write down the selected numbers in the table under the corresponding letters.

PHYSICAL QUANTITIES		FORMULA
A) current through the source with the key open K B) current through the source with the key closed K

Answer:

Two monochromatic waves propagate in a vacuum electromagnetic waves. The photon energy of the first wave is twice as much as the photon energy of the second wave. Determine the ratio of the lengths of these electromagnetic waves.

Answer:

How will they change when β − -decay mass number of the nucleus and its charge?

For each value, determine the appropriate nature of the change:

1) increase

2) decrease

3) will not change

Write in the table the selected numbers for each physical quantity. Numbers in the answer may be repeated.

Answer:

Determine the readings of the voltmeter (see figure), if the error of direct voltage measurement is equal to the division value of the voltmeter. Give your answer in volts. In your answer, write down the value and the error together without a space.

Answer:

To conduct laboratory work to detect the dependence of the resistance of the conductor on its length, the student was given five conductors, the characteristics of which are indicated in the table. Which two of the following guides should the student take in order to conduct this study?

Preparation for the OGE and the Unified State Examination

The average general education

Line UMK A. V. Grachev. Physics (10-11) (basic, advanced)

Line UMK A. V. Grachev. Physics (7-9)

Line UMK A. V. Peryshkin. Physics (7-9)

Preparation for the exam in physics: examples, solutions, explanations

We analyze the tasks of the exam in physics (Option C) with the teacher.

Lebedeva Alevtina Sergeevna, teacher of physics, work experience 27 years. Honorary Diploma of the Ministry of Education of the Moscow Region (2013), Gratitude of the Head of Voskresensky municipal district(2015), Diploma of the President of the Association of Teachers of Mathematics and Physics of the Moscow Region (2015).

The work presents tasks of different levels of complexity: basic, advanced and high. Basic level tasks are simple tasks that test the assimilation of the most important physical concepts, models, phenomena and laws. Tasks advanced level aimed at testing the ability to use the concepts and laws of physics to analyze various processes and phenomena, as well as the ability to solve problems for the application of one or two laws (formulas) on any of the topics of the school physics course. In work 4 tasks of part 2 are tasks high level complexity and test the ability to use the laws and theories of physics in a modified or new situation. The fulfillment of such tasks requires the application of knowledge from two three sections of physics at once, i.e. high level of training. This option is fully compatible demo version Unified State Exam 2017, assignments taken from the open bank of assignments of the Unified State Examination.

The figure shows a graph of the dependence of the speed module on time t. Determine from the graph the path traveled by the car in the time interval from 0 to 30 s.

Solution. The path traveled by the car in the time interval from 0 to 30 s is most simply defined as the area of ​​a trapezoid, the bases of which are the time intervals (30 - 0) = 30 s and (30 - 10) = 20 s, and the height is the speed v= 10 m/s, i.e.

S =	(30 + 20) from	10 m/s = 250 m.
	2

Answer. 250 m

A 100 kg mass is lifted vertically upwards with a rope. The figure shows the dependence of the velocity projection V load on the axis directed upwards, from time t. Determine the modulus of the cable tension during the lift.

Solution. According to the speed projection curve v load on an axis directed vertically upwards, from time t, you can determine the projection of the acceleration of the load

a =	∆v	=	(8 – 2) m/s	\u003d 2 m / s 2.
	∆t		3 s

The load is acted upon by: gravity directed vertically downwards and cable tension force directed along the cable vertically upwards, see fig. 2. Let's write down the basic equation of dynamics. Let's use Newton's second law. The geometric sum of the forces acting on a body is equal to the product of the body's mass and the acceleration imparted to it.

+ = (1)

Let's write down the equation for the projection of vectors in the reference frame associated with the earth, the OY axis will be directed upwards. The projection of the tension force is positive, since the direction of the force coincides with the direction of the OY axis, the projection of the gravity force is negative, since the force vector is opposite to the OY axis, the projection of the acceleration vector is also positive, so the body moves with acceleration upwards. We have

T – mg = ma (2);

from formula (2) the modulus of the tension force

T = m(g + a) = 100 kg (10 + 2) m/s 2 = 1200 N.

Answer. 1200 N.

The body is dragged along a rough horizontal surface at a constant speed, the modulus of which is 1.5 m/s, applying a force to it as shown in Figure (1). In this case, the module of the sliding friction force acting on the body is 16 N. What is the power developed by the force F?

Solution. Let's imagine the physical process specified in the condition of the problem and make a schematic drawing indicating all the forces acting on the body (Fig. 2). Let us write down the basic equation of dynamics.

Tr + + = (1)

Having chosen a reference system associated with a fixed surface, we write equations for the projection of vectors onto the selected coordinate axes. According to the condition of the problem, the body moves uniformly, since its speed is constant and equal to 1.5 m/s. This means that the acceleration of the body is zero. Two forces act horizontally on the body: sliding friction force tr. and the force with which the body is dragged. The projection of the friction force is negative, since the force vector does not coincide with the direction of the axis X. Force projection F positive. We remind you that to find the projection, we lower the perpendicular from the beginning and end of the vector to the selected axis. With this in mind, we have: F cos- F tr = 0; (1) express the force projection F, this F cosα = F tr = 16 N; (2) then the power developed by the force will be equal to N = F cosα V(3) Let's make a replacement, taking into account equation (2), and substitute the corresponding data in equation (3):

N\u003d 16 N 1.5 m / s \u003d 24 W.

Answer. 24 W.

A load fixed on a light spring with a stiffness of 200 N/m oscillates vertically. The figure shows a plot of the offset x cargo from time t. Determine what the weight of the load is. Round your answer to the nearest whole number.

Solution. The weight on the spring oscillates vertically. According to the load displacement curve X from time t, determine the period of oscillation of the load. The oscillation period is T= 4 s; from the formula T= 2π we express the mass m cargo.

=	T	;	m	=	T 2	; m = k	T 2	; m= 200 H/m	(4 s) 2	= 81.14 kg ≈ 81 kg.
	2π		k		4π 2		4π 2		39,438

Answer: 81 kg.

The figure shows a system of two lightweight blocks and a weightless cable, with which you can balance or lift a load of 10 kg. Friction is negligible. Based on the analysis of the above figure, select two correct statements and indicate their numbers in the answer.

1. In order to keep the load in balance, you need to act on the end of the rope with a force of 100 N.
2. The system of blocks shown in the figure does not give a gain in strength.
3. h, you need to pull out a section of rope with a length of 3 h.
4. To slowly lift a load to a height hh.

Solution. In this task, it is necessary to recall simple mechanisms, namely blocks: a movable and a fixed block. The movable block gives a gain in force twice, while the section of the rope must be pulled twice as long, and the fixed block is used to redirect the force. In work, simple mechanisms of winning do not give. After analyzing the problem, we immediately select the necessary statements:

1. To slowly lift a load to a height h, you need to pull out a section of rope with a length of 2 h.
2. In order to keep the load in balance, you need to act on the end of the rope with a force of 50 N.

Answer. 45.

An aluminum weight, fixed on a weightless and inextensible thread, is completely immersed in a vessel with water. The load does not touch the walls and bottom of the vessel. Then, an iron load is immersed in the same vessel with water, the mass of which is equal to the mass of the aluminum load. How will the modulus of the tension force of the thread and the modulus of the force of gravity acting on the load change as a result of this?

1. increases;
2. Decreases;
3. Doesn't change.

Solution. We analyze the condition of the problem and select those parameters that do not change during the study: this is the mass of the body and the liquid into which the body is immersed on the threads. After that, it is better to make a schematic drawing and indicate the forces acting on the load: the force of the thread tension F control, directed along the thread up; gravity directed vertically downward; Archimedean force a, acting from the side of the liquid on the immersed body and directed upwards. According to the condition of the problem, the mass of the loads is the same, therefore, the modulus of the force of gravity acting on the load does not change. Since the density of goods is different, the volume will also be different.

V =	m	.
	p

The density of iron is 7800 kg / m 3, and the aluminum load is 2700 kg / m 3. Consequently, V well< Va. The body is in equilibrium, the resultant of all forces acting on the body is zero. Let's direct the coordinate axis OY up. We write the basic equation of dynamics, taking into account the projection of forces, in the form F ex + Fa – mg= 0; (1) We express the tension force F extr = mg – Fa(2); Archimedean force depends on the density of the liquid and the volume of the submerged part of the body Fa = ρ gV p.h.t. (3); The density of the liquid does not change, and the volume of the iron body is less V well< Va, so the Archimedean force acting on the iron load will be less. We draw a conclusion about the modulus of the thread tension force, working with equation (2), it will increase.

Answer. 13.

Bar mass m slides off a fixed rough inclined plane with an angle α at the base. The bar acceleration modulus is equal to a, the bar velocity modulus increases. Air resistance can be neglected.

Establish a correspondence between physical quantities and formulas with which they can be calculated. For each position of the first column, select the corresponding position from the second column and write down the selected numbers in the table under the corresponding letters.

B) The coefficient of friction of the bar on the inclined plane

3) mg cosα

4) sinα -	a
	g cosα

Solution. This task requires the application of Newton's laws. We recommend making a schematic drawing; indicate all the kinematic characteristics of the movement. If possible, depict the acceleration vector and the vectors of all forces applied to the moving body; remember that the forces acting on the body are the result of interaction with other bodies. Then write down the basic equation of dynamics. Choose a reference system and write down the resulting equation for the projection of force and acceleration vectors;

Following the proposed algorithm, we will make a schematic drawing (Fig. 1). The figure shows the forces applied to the center of gravity of the bar, and the coordinate axes of the reference system associated with the surface of the inclined plane. Since all forces are constant, the movement of the bar will be equally variable with increasing speed, i.e. the acceleration vector is directed in the direction of motion. Let's choose the direction of the axes as shown in the figure. Let's write down the projections of forces on the selected axes.

Let us write down the basic equation of dynamics:

Tr + = (1)

Let us write this equation (1) for the projection of forces and acceleration.

On the OY axis: the projection of the reaction force of the support is positive, since the vector coincides with the direction of the OY axis N y = N; the projection of the friction force is zero since the vector is perpendicular to the axis; the projection of gravity will be negative and equal to mgy= – mg cosα ; acceleration vector projection a y= 0, since the acceleration vector is perpendicular to the axis. We have N – mg cosα = 0 (2) from the equation we express the reaction force acting on the bar from the side of the inclined plane. N = mg cosα (3). Let's write down the projections on the OX axis.

On the OX axis: force projection N is equal to zero, since the vector is perpendicular to the OX axis; The projection of the friction force is negative (the vector is directed in the opposite direction relative to the selected axis); the projection of gravity is positive and equal to mg x = mg sinα(4) of right triangle. Positive acceleration projection a x = a; Then we write equation (1) taking into account the projection mg sinα- F tr = ma (5); F tr = m(g sinα- a) (6); Remember that the force of friction is proportional to the force of normal pressure N.

By definition F tr = μ N(7), we express the coefficient of friction of the bar on the inclined plane.

μ =	F tr	=	m(g sinα- a)	= tanα –	a	(8).
	N		mg cosα		g cosα

We select the appropriate positions for each letter.

Answer. A-3; B - 2.

Task 8. Gaseous oxygen is in a vessel with a volume of 33.2 liters. The gas pressure is 150 kPa, its temperature is 127 ° C. Determine the mass of gas in this vessel. Express your answer in grams and round to the nearest whole number.

Solution. It is important to pay attention to the conversion of units to the SI system. Convert temperature to Kelvin T = t°С + 273, volume V\u003d 33.2 l \u003d 33.2 10 -3 m 3; We translate pressure P= 150 kPa = 150,000 Pa. Using the ideal gas equation of state

express the mass of the gas.

Be sure to pay attention to the unit in which you are asked to write down the answer. It is very important.

Answer. 48

Task 9. An ideal monatomic gas in an amount of 0.025 mol expanded adiabatically. At the same time, its temperature dropped from +103°С to +23°С. What is the work done by the gas? Express your answer in Joules and round to the nearest whole number.

Solution. First, the gas is monatomic number of degrees of freedom i= 3, secondly, the gas expands adiabatically - this means no heat transfer Q= 0. The gas does work by reducing the internal energy. With this in mind, we write the first law of thermodynamics as 0 = ∆ U + A G; (1) we express the work of the gas A g = –∆ U(2); We write the change in internal energy for a monatomic gas as

Answer. 25 J.

The relative humidity of a portion of air at a certain temperature is 10%. How many times should the pressure of this portion of air be changed in order for its relative humidity to increase by 25% at a constant temperature?

Solution. Questions related to saturated steam and air humidity most often cause difficulties for schoolchildren. Let's use the formula for calculating the relative humidity of the air

According to the condition of the problem, the temperature does not change, which means that the saturation vapor pressure remains the same. Let's write formula (1) for two states of air.

φ 1 \u003d 10%; φ 2 = 35%

We express the air pressure from formulas (2), (3) and find the ratio of pressures.

P 2	=	φ 2	=	35	= 3,5
P 1		φ 1		10

Answer. The pressure should be increased by 3.5 times.

The hot substance in the liquid state was slowly cooled in a melting furnace with a constant power. The table shows the results of measurements of the temperature of a substance over time.

Choose from the proposed list two statements that correspond to the results of measurements and indicate their numbers.

1. The melting point of the substance under these conditions is 232°C.
2. In 20 minutes. after the start of measurements, the substance was only in the solid state.
3. The heat capacity of a substance in the liquid and solid state is the same.
4. After 30 min. after the start of measurements, the substance was only in the solid state.
5. The process of crystallization of the substance took more than 25 minutes.

Solution. As matter cooled, its internal energy decreased. The results of temperature measurements allow to determine the temperature at which the substance begins to crystallize. As long as a substance changes from a liquid state to a solid state, the temperature does not change. Knowing that the melting temperature and the crystallization temperature are the same, we choose the statement:

1. The melting point of a substance under these conditions is 232°C.

The second correct statement is:

4. After 30 min. after the start of measurements, the substance was only in the solid state. Since the temperature at this point in time is already below the crystallization temperature.

Answer. 14.

In an isolated system, body A has a temperature of +40°C, and body B has a temperature of +65°C. These bodies are brought into thermal contact with each other. After some time, thermal equilibrium is reached. How did the temperature of body B and the total internal energy of body A and B change as a result?

For each value, determine the appropriate nature of the change:

1. Increased;
2. Decreased;
3. Hasn't changed.

Write in the table the selected numbers for each physical quantity. Numbers in the answer may be repeated.

Solution. If in an isolated system of bodies there are no energy transformations other than heat transfer, then the amount of heat given off by bodies whose internal energy decreases is equal to the amount of heat received by bodies whose internal energy increases. (According to the law of conservation of energy.) In this case, the total internal energy of the system does not change. Problems of this type are solved on the basis of the heat balance equation.

∆U = ∑	n	∆U i = 0 (1);
	i = 1

where ∆ U- change in internal energy.

In our case, as a result of heat transfer, the internal energy of body B decreases, which means that the temperature of this body decreases. The internal energy of body A increases, since the body received the amount of heat from body B, then its temperature will increase. The total internal energy of bodies A and B does not change.

Answer. 23.

Proton p, flown into the gap between the poles of an electromagnet, has a speed perpendicular to the magnetic field induction vector, as shown in the figure. Where is the Lorentz force acting on the proton directed relative to the figure (up, towards the observer, away from the observer, down, left, right)

Solution. A magnetic field acts on a charged particle with the Lorentz force. In order to determine the direction of this force, it is important to remember the mnemonic rule of the left hand, not to forget to take into account the charge of the particle. We direct the four fingers of the left hand along the velocity vector, for a positively charged particle, the vector should enter the palm perpendicularly, the thumb set aside by 90 ° shows the direction of the Lorentz force acting on the particle. As a result, we have that the Lorentz force vector is directed away from the observer relative to the figure.

Answer. from the observer.

Tension modulus electric field in a flat air capacitor with a capacity of 50 microfarads is 200 V / m. The distance between the capacitor plates is 2 mm. What is the charge on the capacitor? Write your answer in µC.

Solution. Let's convert all units of measurement to the SI system. Capacitance C \u003d 50 μF \u003d 50 10 -6 F, distance between plates d= 2 10 -3 m. The problem deals with a flat air capacitor - a device for accumulating electric charge and electric field energy. From the electric capacitance formula

where d is the distance between the plates.

Let's Express the Tension U= E d(4); Substitute (4) in (2) and calculate the charge of the capacitor.

q = C · Ed\u003d 50 10 -6 200 0.002 \u003d 20 μC

Pay attention to the units in which you need to write the answer. We received it in pendants, but we present it in μC.

Answer. 20 µC.

The student conducted the experiment on the refraction of light, presented in the photograph. How does the angle of refraction of light propagating in glass and the refractive index of glass change with increasing angle of incidence?

1. is increasing
2. Decreases
3. Doesn't change
4. Record the selected numbers for each answer in the table. Numbers in the answer may be repeated.

Solution. In tasks of such a plan, we recall what refraction is. This is a change in the direction of wave propagation when passing from one medium to another. It is caused by the fact that the speeds of wave propagation in these media are different. Having figured out from which medium into which light propagates, we write the law of refraction in the form

sinα	=	n 2	,
sinβ		n 1

where n 2 - the absolute refractive index of glass, the medium where the light goes; n 1 is the absolute refractive index of the first medium where the light comes from. For air n 1 = 1. α is the angle of incidence of the beam on the surface of the glass half-cylinder, β is the angle of refraction of the beam in the glass. Moreover, the angle of refraction will be less than the angle of incidence, since glass is an optically denser medium - a medium with a big indicator refraction. The speed of light propagation in glass is slower. Please note that the angles are measured from the perpendicular restored at the point of incidence of the beam. If you increase the angle of incidence, then the angle of refraction will also increase. The refractive index of glass will not change from this.

Answer.

Copper jumper at time t 0 = 0 starts moving at a speed of 2 m/s along parallel horizontal conductive rails, to the ends of which a 10 ohm resistor is connected. The entire system is in a vertical uniform magnetic field. The resistance of the jumper and the rails is negligible, the jumper is always perpendicular to the rails. The flux Ф of the magnetic induction vector through the circuit formed by the jumper, rails and resistor changes over time t as shown in the chart.

Using the graph, select two true statements and indicate their numbers in your answer.

1. By the time t\u003d 0.1 s, the change in the magnetic flux through the circuit is 1 mWb.
2. Induction current in the jumper in the range from t= 0.1 s t= 0.3 s max.
3. The module of the EMF of induction that occurs in the circuit is 10 mV.
4. The strength of the inductive current flowing in the jumper is 64 mA.
5. To maintain the movement of the jumper, a force is applied to it, the projection of which on the direction of the rails is 0.2 N.

Solution. According to the graph of the dependence of the flow of the magnetic induction vector through the circuit on time, we determine the sections where the flow Ф changes, and where the change in the flow is zero. This will allow us to determine the time intervals in which the inductive current will occur in the circuit. Correct statement:

1) By the time t= 0.1 s the change in the magnetic flux through the circuit is 1 mWb ∆F = (1 - 0) 10 -3 Wb; The EMF module of induction that occurs in the circuit is determined using the EMP law

Answer. 13.

According to the graph of the dependence of the current strength on time in an electric circuit whose inductance is 1 mH, determine the self-induction EMF module in the time interval from 5 to 10 s. Write your answer in microvolts.

Solution. Let's convert all quantities to the SI system, i.e. we translate the inductance of 1 mH into H, we get 10 -3 H. The current strength shown in the figure in mA will also be converted to A by multiplying by 10 -3.

The self-induction EMF formula has the form

in this case, the time interval is given according to the condition of the problem

∆t= 10 s – 5 s = 5 s

seconds and according to the schedule we determine the interval of current change during this time:

∆I= 30 10 –3 – 20 10 –3 = 10 10 –3 = 10 –2 A.

We substitute numerical values ​​into formula (2), we obtain

| Ɛ | \u003d 2 10 -6 V, or 2 μV.

Answer. 2.

Two transparent plane-parallel plates are tightly pressed against each other. A beam of light falls from the air onto the surface of the first plate (see figure). It is known that the refractive index of the upper plate is equal to n 2 = 1.77. Establish a correspondence between physical quantities and their values. For each position of the first column, select the corresponding position from the second column and write down the selected numbers in the table under the corresponding letters.

Solution. To solve problems on the refraction of light at the interface between two media, in particular, problems on the passage of light through plane-parallel plates, the following order of solution can be recommended: make a drawing indicating the path of rays going from one medium to another; at the point of incidence of the beam at the interface between two media, draw a normal to the surface, mark the angles of incidence and refraction. Pay special attention to the optical density of the media under consideration and remember that when a light beam passes from an optically less dense medium to an optically denser medium, the angle of refraction will be less than the angle of incidence. The figure shows the angle between the incident beam and the surface, and we need the angle of incidence. Remember that the angles are determined from the perpendicular restored at the point of incidence. We determine that the angle of incidence of the beam on the surface is 90° - 40° = 50°, the refractive index n 2 = 1,77; n 1 = 1 (air).

Let's write the law of refraction

sinβ =	sin50	= 0,4327 ≈ 0,433
	1,77

Let's build an approximate path of the beam through the plates. We use formula (1) for the 2–3 and 3–1 boundaries. In response we get

A) The sine of the angle of incidence of the beam on the boundary 2–3 between the plates is 2) ≈ 0.433;

B) The angle of refraction of the beam when crossing the boundary 3–1 (in radians) is 4) ≈ 0.873.

Answer. 24.

Determine how many α - particles and how many protons are obtained as a result of a thermonuclear fusion reaction

+ → x+ y;

Solution. For all nuclear reactions the laws of conservation of electric charge and the number of nucleons are observed. Denote by x the number of alpha particles, y the number of protons. Let's make equations

+ → x + y;

solving the system we have that x = 1; y = 2

Answer. 1 – α-particle; 2 - protons.

The momentum modulus of the first photon is 1.32 · 10 -28 kg m/s, which is 9.48 · 10 -28 kg m/s less than the momentum module of the second photon. Find the energy ratio E 2 /E 1 of the second and first photons. Round your answer to tenths.

Solution. The momentum of the second photon is greater than the momentum of the first photon by condition, so we can imagine p 2 = p 1 + ∆ p(one). The photon energy can be expressed in terms of the photon momentum using the following equations. This E = mc 2(1) and p = mc(2), then

E = pc (3),

where E is the photon energy, p is the momentum of the photon, m is the mass of the photon, c= 3 10 8 m/s is the speed of light. Taking into account formula (3), we have:

E 2	=	p 2	= 8,18;
E 1		p 1

We round the answer to tenths and get 8.2.

Answer. 8,2.

The nucleus of an atom has undergone radioactive positron β-decay. How did this change the electric charge of the nucleus and the number of neutrons in it?

For each value, determine the appropriate nature of the change:

1. Increased;
2. Decreased;
3. Hasn't changed.

Write in the table the selected numbers for each physical quantity. Numbers in the answer may be repeated.

Solution. Positron β - decay into atomic nucleus occurs during the transformation of a proton into a neutron with the emission of a positron. As a result, the number of neutrons in the nucleus increases by one, the electric charge decreases by one, and the mass number of the nucleus remains unchanged. Thus, the transformation reaction of an element is as follows:

Answer. 21.

Five experiments were carried out in the laboratory to observe diffraction using various diffraction gratings. Each of the gratings was illuminated by parallel beams of monochromatic light with a certain wavelength. The light in all cases was incident perpendicular to the grating. In two of these experiments, the same number of principal diffraction maxima were observed. Indicate first the number of the experiment in which a diffraction grating with a shorter period was used, and then the number of the experiment in which a diffraction grating with a longer period was used.

Solution. Diffraction of light is the phenomenon of a light beam into the region of a geometric shadow. Diffraction can be observed when opaque areas or holes are encountered in the path of a light wave in large and opaque barriers for light, and the dimensions of these areas or holes are commensurate with the wavelength. One of the most important diffraction devices is a diffraction grating. The angular directions to the maxima of the diffraction pattern are determined by the equation

d sinφ = kλ(1),

where d is the period of the diffraction grating, φ is the angle between the normal to the grating and the direction to one of the maxima of the diffraction pattern, λ is the light wavelength, k is an integer called the order of the diffraction maximum. Express from equation (1)

Selecting pairs according to the experimental conditions, we first choose 4 where a diffraction grating with a smaller period was used, and then the number of the experiment in which a diffraction grating with a large period was used is 2.

Answer. 42.

Current flows through the wire resistor. The resistor was replaced with another, with a wire of the same metal and the same length, but having half the cross-sectional area, and half the current was passed through it. How will the voltage across the resistor and its resistance change?

For each value, determine the appropriate nature of the change:

1. will increase;
2. will decrease;
3. Will not change.

Write in the table the selected numbers for each physical quantity. Numbers in the answer may be repeated.

Solution. It is important to remember on what quantities the resistance of the conductor depends. The formula for calculating the resistance is

Ohm's law for the circuit section, from formula (2), we express the voltage

U = I R (3).

According to the condition of the problem, the second resistor is made of wire of the same material, the same length, but different cross-sectional area. The area is twice as small. Substituting in (1) we get that the resistance increases by 2 times, and the current decreases by 2 times, therefore, the voltage does not change.

Answer. 13.

Oscillation period mathematical pendulum on the surface of the Earth is 1.2 times the period of its oscillations on some planet. What is the gravitational acceleration modulus on this planet? The effect of the atmosphere in both cases is negligible.

Solution. A mathematical pendulum is a system consisting of a thread, the dimensions of which are much larger than the dimensions of the ball and the ball itself. Difficulty may arise if the Thomson formula for the period of oscillation of a mathematical pendulum is forgotten.

T= 2π (1);

l is the length of the mathematical pendulum; g- acceleration of gravity.

By condition

Express from (3) g n \u003d 14.4 m / s 2. It should be noted that the acceleration of free fall depends on the mass of the planet and the radius

Answer. 14.4 m / s 2.

A straight conductor with a length of 1 m, through which a current of 3 A flows, is located in a uniform magnetic field with induction IN= 0.4 T at an angle of 30° to the vector . What is the modulus of the force acting on the conductor from the magnetic field?

Solution. If a current-carrying conductor is placed in a magnetic field, then the field on the current-carrying conductor will act with the Ampere force. We write the formula for the Ampère force modulus

F A = I LB sinα;

F A = 0.6 N

Answer. F A = 0.6 N.

The energy of the magnetic field stored in the coil when a direct current is passed through it is 120 J. How many times should the strength of the current flowing through the coil winding be increased in order for the energy of the magnetic field stored in it to increase by 5760 J.

Solution. The energy of the magnetic field of the coil is calculated by the formula

W m =	LI 2	(1);
	2

By condition W 1 = 120 J, then W 2 \u003d 120 + 5760 \u003d 5880 J.

I 1 2 =	2W 1	; I 2 2 =	2W 2	;
	L		L

Then the current ratio

I 2 2	= 49;	I 2	= 7
I 1 2		I 1

Answer. The current strength must be increased by 7 times. In the answer sheet, you enter only the number 7.

An electrical circuit consists of two light bulbs, two diodes, and a coil of wire connected as shown in the figure. (A diode only allows current to flow in one direction, as shown at the top of the figure.) Which of the bulbs will light up if the north pole of the magnet is brought closer to the coil? Explain your answer by indicating what phenomena and patterns you used in the explanation.

Solution. The lines of magnetic induction come out of the north pole of the magnet and diverge. As the magnet approaches, the magnetic flux through the coil of wire increases. In accordance with Lenz's rule, the magnetic field created by the inductive current of the loop must be directed to the right. According to the gimlet's rule, the current should flow clockwise (when viewed from the left). In this direction, the diode in the circuit of the second lamp passes. So, the second lamp will light up.

Answer. The second lamp will light up.

Aluminum spoke length L= 25 cm and cross-sectional area S\u003d 0.1 cm 2 is suspended on a thread by the upper end. The lower end rests on the horizontal bottom of the vessel in which water is poured. The length of the submerged part of the spoke l= 10 cm Find strength F, with which the needle presses on the bottom of the vessel, if it is known that the thread is located vertically. The density of aluminum ρ a = 2.7 g / cm 3, the density of water ρ in = 1.0 g / cm 3. Acceleration of gravity g= 10 m/s 2

Solution. Let's make an explanatory drawing.

– Thread tension force;

– Reaction force of the bottom of the vessel;

a is the Archimedean force acting only on the immersed part of the body and applied to the center of the immersed part of the spoke;

- the force of gravity acting on the spoke from the side of the Earth and is applied to the center of the entire spoke.

By definition, the mass of the spoke m and the modulus of the Archimedean force are expressed as follows: m = SLρ a (1);

F a = Slρ in g (2)

Consider the moments of forces relative to the suspension point of the spoke.

M(T) = 0 is the moment of tension force; (3)

M(N) = NL cosα is the moment of the reaction force of the support; (4)

Taking into account the signs of the moments, we write the equation

NL cos + Slρ in g (L –	l	) cosα = SLρ a g	L	cos(7)
	2		2

given that, according to Newton's third law, the reaction force of the bottom of the vessel is equal to the force F d with which the needle presses on the bottom of the vessel we write N = F e and from equation (7) we express this force:

F d = [	1	Lρ a– (1 –	l	)lρ in] Sg (8).
	2		2L

Plugging in the numbers, we get that

F d = 0.025 N.

Answer. F d = 0.025 N.

A bottle containing m 1 = 1 kg of nitrogen, when tested for strength exploded at a temperature t 1 = 327°C. What mass of hydrogen m 2 could be stored in such a cylinder at a temperature t 2 \u003d 27 ° C, with a fivefold margin of safety? Molar mass nitrogen M 1 \u003d 28 g / mol, hydrogen M 2 = 2 g/mol.

Solution. We write the equation of state of an ideal gas Mendeleev - Clapeyron for nitrogen

where V- the volume of the balloon, T 1 = t 1 + 273°C. According to the condition, hydrogen can be stored at a pressure p 2 = p 1 /5; (3) Given that

we can express the mass of hydrogen by working immediately with equations (2), (3), (4). Final Formula looks like:

m 2 =	m 1		M 2		T 1	(5).
	5		M 1		T 2

After substituting numerical data m 2 = 28

Answer. m 2 = 28

In the ideal oscillatory circuit amplitude of current fluctuations in the inductor I m= 5 mA, and the amplitude of the voltage across the capacitor U m= 2.0 V. At time t the voltage across the capacitor is 1.2 V. Find the current in the coil at this moment.

Solution. In an ideal oscillatory circuit, the energy of vibrations is conserved. For the moment of time t, the energy conservation law has the form

C	U 2	+ L	I 2	= L	I m 2	(1)
	2		2		2

For the amplitude (maximum) values, we write

and from equation (2) we express

C	=	I m 2	(4).
L		U m 2

Let us substitute (4) into (3). As a result, we get:

I = I m (5)

Thus, the current in the coil at the time t is equal to

I= 4.0 mA.

Answer. I= 4.0 mA.

There is a mirror at the bottom of a reservoir 2 m deep. A beam of light, passing through the water, is reflected from the mirror and exits the water. The refractive index of water is 1.33. Find the distance between the point of entry of the beam into the water and the point of exit of the beam from the water, if the angle of incidence of the beam is 30°

Solution. Let's make an explanatory drawing

α is the beam incidence angle;

β is the angle of refraction of the beam in water;

AC is the distance between the beam entry point into the water and the beam exit point from the water.

According to the law of refraction of light

sinβ =	sinα	(3)
	n 2

Consider a rectangular ΔADB. In it AD = h, then DВ = AD

tgβ = h tgβ = h	sinα	= h	sinβ	= h	sinα	(4)
	cosβ

We get the following expression:

AC = 2 DB = 2 h	sinα	(5)

Substitute the numerical values ​​in the resulting formula (5)

Answer. 1.63 m

In preparation for the exam, we invite you to familiarize yourself with work program in physics for grades 7–9 to the line of teaching materials Peryshkina A.V. And the working program of the in-depth level for grades 10-11 to the TMC Myakisheva G.Ya. Programs are available for viewing and free download to all registered users.